Making samples


Experienced staff at MECC are willing to provide technical supports with knowledge and data that have been accumulated for a long time period.
They calculate spinning conditions to judge feasibility to spin designated materials into nanofibers, which can save much time and cost to be spent by our customers.
Any samples of small quanity or of wide and long sheets can be made upon request.

List of materials spun into nanofibers

Abbreviation Chemical Name Fiber Diameter Biodegradability
Polymer
PVDF Polyvinylidene fluoride >300nm  
PEO Polyethylene oxide >400nm  
PVA Polyvinyl alcohol >300nm
PLLA Poly-L-lactic acid >400nm
Nylon6, 6 Nylon6, 6 >300nm  
Nylon6 Nylon6 >100nm  
PET Polyethylene terephthalate >400nm  
PS Polystyrene >400nm  
PU Polyurethane >400nm  
PMMA Poly methyl methacrylate >900nm  
PP Polypropylene >1.5nm  
PE Polyethylene >900nm  
PSU Polysulfone >400nm  
PAN Polyacrylonitrile >300nm  
PCL Polycaprolactone >500nm
PLMA* Poly (lactic acid, glycolic acid) >1.0μm
PES Polyethersulfone >400nm  
PEG Polyethylene glycol >700nm  
CA Cellulose acetate >400nm
PI Polyimide >400nm  
*Copolymer
Note: Materials of  a different manufacturer may be difficult to be spun or some materials may not be adequate for mass production.